T/520AD

Maximum roll dimensions: diameter 30cm (12"), length 175cm (69") and weight 60kg (130 lbs). Machine totally closed and highly safe for the operator, complying with European Directive 2006/42/EC for safety regulations . Numerically controlled positioning of the blade carriage by brusless motor and automatic cut with the possibility of programming up to 6 cutting measures for each automatic cycle and numerically controlled blade penetration movement into the roll. Pivoting blade activated by electric cylinder Laser system to measure the blade diameter with automatic adjustment of stop position near the roll shaft and indication of the circularity error. No knob to adjust the forward travel end of the blade carriage. Automatic roll diameter adjustment with a measuring photocell to stop the reverse stroke of the blade carriage once the blade is completely out of the roll. The stop position outside the roll can be varied with the machine joystick Automatic positioning of the blade at the edge of the roll and automatic return of the blade to the initial position of the automatic cycle Machine equipped with a rotating roll shaft covered by an easily replaceable PVC tube Automatic sharpening of the circular knife (both sides) with adjustable sharpening time after a programmable number of cuts. PLC controlled machine and equipped with a complete diagnostic softwares on a touch screen graphic panel. Machine prepared for connection Industry 4.0 with Modbus/TCP protocol