TPM/1250E

Very sturdy structure of the machine (total weight over 500 kg) Touch screen panel with alarm messages and for setting the meter counter with automatic stop of the machine at the pre-set value Pneumatically controlled crush cut knives in HSS steel cutting on a hardened steel roller. Cutting pressure of the knives pneumatically adjustable and displayed on a manometer. Adjustable cutting and rewinding tension to obtain tension free collarette rolls. Very easy and simple adjustment of the machine. Only two handwheels with indicator clock inside. The adjustments can be repeated and read on the two hands of the position indicator clock. The lower disk speed varies according to the distance between the vertical rollers. A partial synchronization is achieved then fine tuning is performed by turning a handwheel. The two hands of the position indicator clock inside the handwheel allow to accurately repeat previously noted settings Servomotor to open or close the fabric feeding rollers symmetrically to the rotating disk. Automatic machine stop at the preset roll diameter or with the meter counter Number of cutting knives : 3 (standard). Uup to 7 blades with extra price Max diameter of the cut rolls : 28 cm (11") Band width of the main cutting strip : from 15 mm to 250 mm (depending on the material and on the tubular fabric width)