Eastman Machine
L135 Laser System
Automated cutting system
Product features
Eastman’s gas assist, class 4 laser cutting machine cuts and seals material edge simultaneously with unmatched precision. The L135 mounts to the gantry of a static or conveyor table, allowing quick transition from traditional cutting to laser cutting.
Eastman’s gas assist, class 4 laser cutting machine cuts and seals material edge simultaneously with unmatched precision. Make detailed cuts without physical contact, reducing defects from wrinkling and pulling. The L135 laser mounts to the gantry of a static or conveyor table, allowing quick transition from traditional cutting to laser cutting. Marking and labeling tools, or any other tool head options, can be added. Please contact the factory for CL135 conveyor technical specifications.
Various laser wattage configurations are available: 50, 60, 80, 100, or 120 watts. The ceramic core is durable and provides optimal laser stability while cutting, engraving, or perforating.
Available in a range of widths, lengths, and various tool head accessory options, the laser cutting table will be built to match your application needs, allowing you to customize the tools and capabilities to maximize productivity.
Standard Features
Gas assist, class 4 laser
Cut and seal the material edge
Perforate and/or engrave material
Cut without physical contact, reducing defects
Various laser wattage configurations are available: 50, 60, 80, 100, or 120 watts
Cutting Surface
The standard cutting surface options with the laser include galvanized steel, steel honeycomb, and wire mesh. All options easily slide in place over the cutting tabletop. A supplemental table surface is supplied as a roll-down for use when cutting with traditional blades.
International Compliance Ratings
The operating computer and control cabinet are housed in an ergonomic enclosure that can be sealed to offer dust and water-resistant protection in harsh or high particulate environments. Additionally, cabling connectors, servo motors, and display components meet recognized international protection ratings requirements.
Industrial Design
Advanced electro-pneumatic regulator for precise tool pressure control
Heavy-duty cable connectors
Easy access, sealed doors for inspection and maintenance
Heavy-gauge steel construction with scratch-resistant powder coated finish
Safety
Gantry-mounted, laser enabled indicator light
Four remote emergency stops: two on cutting gantry, two system-mounted
Additional gantry-mounted stop disks pause system operation until returned to neutral and reset. Operation can then be resumed from any position
Multiple fume extraction options available to capture hazardous fumes and particulates at the source
Key switch activated for laser lockout/tagout, safeguards employees from unexpected start-up
Specifications
| Laser Type | CO2 Ceramic Core |
|---|---|
| Laser Class | Class 4 |
| Beam Diameter | 0.098 in. (2.5mm) |
| Beam Diameter at Cutting Surface | 0.014 in. (0.343mm) |
| Wavelength | 10.6 µm |
| Laser Cooling | Air |
| Laser Watts | 50, 60, 80, 100, and 120 watt configurations |
| Focal Distance | 2.5 in. (63.5mm) |
| Focus Tolerance Range | +/- 0.079 in. (+/- 2mm) |
| Maximum Laser Spot Height | 0.80in (20.4mm) |
| Fume Extraction | Above table: 266 cfm, required 3 in. (76.2mm) flex hose. Below table: 266 cfm |
| Gas Assist | N2 recommended, CO2 acceptable |
| Laser Recharge | Not required |
| Laser Lockout | Key switch |
| Signal Indicator | Green: Not actively firing; system state is idle, Orange: Not actively firing; system state is gantry moving, Red: Actively firing, Red/Yellow Flashing: laser fault |
| Width | 54 in. (1.37m) 60 in. (1.54m) 72 in. (1.82m) 78 in. (1.98 m) 96 in. (2.44 m) 108 in. (2.74 m) 114 in. (2.90 m) 126 in. (3.20 m). Please contact the factory for active cutting zone dimensions. Custom widths available, please contact the factory for more information. |
| Length | 8 ft. (2.44m) 12 ft. (3.66m) 16 ft. (4.88m) 20 ft. (6.10m) 36 ft. (10.97m)+ Please contact the factory for active cutting zone dimensions. Custom lengths available, please contact the factory for more information. |
| Drive System | Dual-X Axis, Y-Axis & Theta Axis. X & Y-Axis Rack & Pinion Drive, Brushless Servo Motors |
| Electric - Control Power/PC | 230V, 3 ph, 50/60 Hz, 5.4 kVA. Stand-alone step-down/up transformer required for other voltages. |
| Electric - Vacuum Blower | 208/230/380/460V, 3 ph, 50/60 Hz, 7.5 HP, VFD control optional |
| Power: Pneumatic | 75 – 90 psi at 15 SCFM (5.17 – 6.2 bars at 0.42cmm) |
| Maximum Laser/Plotting Speed | Material and table length dependent. |
| Material Thickness | Material dependent |
| Compressed Air Consumption | 15 CFM |
| Sound Level | <76 db(A) |
| Operating Temperature | 55 – 100°F (12 – 37°C) |
| Humidity | 20 – 80% (non-condensing) |
| Options | 2 in. (50.8mm) laser lens, brass tip laser nozzle, lens removal tool, lens cleaning tissue, 3 in. (76.2mm) dust connection hose, test burn cards, spare laser optics kit, fume extraction pre-filter, fume extraction hepa-filter, fume extraction carbon-filter |
| Hazardous Material | Do not cut flammable material or any material emitting toxic fumes when cut with the laser. See Material Cut/Do Not Cut list. |
Catalogue
The L135 Laser System documents Eastman Machine publishes, on their own site. They open in a new tab.
The file is published and updated by the manufacturer; it is not copied here, so nobody downloads an outdated version.
Product information, photographs and specifications: Eastman Machine. No prices or stock here: ask us and we will get back to you.
Other automated cutting systems models
Tell us the operation you need to solve and we will reply with the right configuration and the lead time.