SPR/SYNCRO Model 15-⁠78

Biascutting machine to cut in bias a fabric seamed into tubular form or a tubular fabric Tubular fabric width from 35 to 110 cm (13" ¾ to 43"). Biascutting angle adjustable from 15° to 78° Highly safe for the operator. This unit has been designed with the utmost attention to safety features to obtain, for the first time in the market, from IMQ (www.imq.it Italian Institute for Quality Trademarks) the Certification of Examination “CE” for standards 2006/42/EC. Inverter to adjust the biascutting speed up to 60 Mt/min Electromagnetic clutch to adjust the rewinding tension of the roll with a potentiometer and digital meter counter presettable on the touch screen panel. Electronic synchronization of the unwinding device with the cutting section of the unit. Pneumatic opening of the two biascutting shafts with adjustment of the pressure on the fabric. Pneumatic adjustment of the pressure on both sides of the biascut fabric rewinding shaft and pneumatic cylinder to lift the fabric pressure roller on the biascut fabric. Pneumatic system to lift rewinding shaft of the biascut fabric for easier loading/unloading operations. Expanding biascutting arm of the tubular fabric with air cushion for a perfect feeding of difficult fabrics Additional set of elongated biascutting shafts for cutting tubulars from 600 mm to 800 mm in diameter with biascutting angles from 57° to 62° Photoelectric barrier for sudden stop of the machine in case of accidental intrusion in the rewinding area. PLC controlled machine with a separate safety PLC to control the safety devices and equipped with a complete message system to inform the operator of any possible alarm and to display instructions to restart the unit on a touch screen graphic panel.