Press machines

Rotary Fusing Press

The Heater Position Line is a curbed Shape. This Special Curbed Line offers high Efficiency and Excellent fusing Results for Top Fusing. The 3 pieces of the Heater of the Front part Melt Resin Paste well and the 6 pieces of the Heater of the Rear Part Promote Fusing Efficiency. This Machine adopts Special Heat-proof Silicon rubber for the Upper Pressure roller and a steel roller as a Lower Pressure Roller for Fine Fusing Results. The Cooling Device (Spot Cooling Device) is equipped as a Standard for Easy Handling of fused Material.

Double Presser Straight Linear Fusing Press

□The Newly Designed Double Pressure System assures Higher Pressure Efficiency. The first roller spreads resin between the fabric and interlining, and the second roller strengthens adhesion. □The Heater Zone is divided into Four parts and each Zone can be adjusted Separately. The Mandatory Pressure System is newly adopted to improve Thermal Efficiency. □As the Tension Rollers are adopted on the Back of the belts, Fabrics or extra Interlining never Twine around the Tension Rollers. □Adopted a New belt warping Prevention device which moves less than the old type but performs Better and prevents Extra Tension. □The Seemless Belt is adopted as standard and it promises a Long Life. □The Second Cooling fan cools down the fused Material immediately. □In addition to the Belt Cleaner on the surface of the Belt, another belt cleaner is adopted on the Back of the Belt. □The disposition of the Heater can be customized to be Flat.

Straight Linear Fusing Press

○The Seamless Belt is adopted as Standard and it promises Long Life. ○The Big Pressurization Roller assures Uniform High Pressure. ○ Horizontal Pressurization prevents Puckering. ○The Cooling Fun will make Cool Down the Fused Material immediately. ○As the Tension Rollers are adopted on the Back of the belts, Fabrics or extra interlining never twine around the tension roller, therefore elts will be never damaged by twined fabrics or interlining. *Require Air Compressor

Straight Linear Fusing Press

This is a continuous type machine therefore production is greatly increased. The automatic Belt Warping Prevention Device keeps both the upper and lower belts in the same position. Using the feed back system, damage is prevented. (Patent Pending) Using the electronic thermostat and the SSR, the temperature difference’s range is kept at ±3℃. The SSR’s electronic parts have no contact points making for durability. Various stackers can be used with this machine. This machine has a front conveyor belt which greatly increases production levels. The Rotary Strip Off Device can be attached as optional equipment. By pushing the heater control switch the temperature of the upper and lower or front and rear heater can be easily controlled. This means various materials can be used safely. The pressure roller is covered with a layer of silicon rubber. The upper and lower pressure rollers are completely separated when the pressure is set at 0. The heating plate is covered with special hard alumite, making it durable. The exchange of belts is very easy. The Belt Stopping Device stops the belt automatically if the belt warps therefore protecting the belt. The entrance of the feed-in point can be adjusted easily according to the thickness of the material and interlining being used. An anti-puckering roller is installed in this machine. This roller’s position can be adjusted. Wing tables can be attached to the work table. When these tables are not in use, they can be folded down. (Option) The pressure is easily adjusted. Depending on which of the optional tables is used, various shapes can be easily pressed.

Compact Fusing Press

Automatic belt warping prevention device. The Upper belt warping prevention system adopts a direct limit switch type like the lower belt warping prevention system. Increased the fusing belt width to 450mm. Adopted rubber driving rollers for non-slip driving. MS MODEL has been equipped with a rotary strip-off device as standard.

Flat Type fusing Press

Motor driven fully-automatic flat type press. Compact and requires no extra equipment such as an air compressor, and can be installed very easily. Uses a special heater and the aluminium heater plates give excellent thermal efficiency and uniform temperature distribution.

Flat Type fusing Press

Fully – Automatic Air-Driven Type. The Horizontal Pressure System Gives Uniform Pressure, Assuring No Slippage of Product. Pressure Pressing time and Temperature Control Can be Made Easily. The Teflon Sheet is Used on The Aluminum Upper Press Plate Doesn’t Soil and It Can Be Cleaned Easily. The Suction System is Automatic. Pedal-Operation is Also Possible. The Double Moving Tray is Standard Equipment, The Productivity is Improved. ( Side or Front Type TRay for Choice)

Flat Type fusing Press

Motor-driven fully-automatic flat-type press. Compact and requires no extra equipment such as an air compressor, and can be installed very easily. Uses a special heater and the aluminum heater plates give excellent thermal efficiency and uniform temperature distribution. Anti-static type Teflon sheet is used for the upper plate, making it easy to clean. Although the suction system is automatic, pedal operation is also possible (when using a tray, pedal operation can not be used). Electrical contact-pointless components are used to improve the durability of the machine. The powerful 200w blow motor provides extra vacuum-sucking power, and the Sirocco fan is equipped to reduce noise. Sizes and spacings of the suction holes in the center part and around both ends on the lower plate have seen properly adjusted, to provide uniform sucking power over the entire surface. Specifications

Flat Type fusing Press

In case of emergencies, just push the emergency button to raise the upper plate. The upper plate is coated with an anti-static Teflon sheet for soil-free operation. Any adhesive or other impurity that sticks to the plate can be removed with ease so that materials are always kept clean. Uses a special heater that exhibits excellent thermal efficiency and assures a long service life. Aluminum is used for the upper plate, and the electronic thermostat and SSR control the temperature difference range to within±4℃. A 300W blow motor makes a powerful vacuum and provides extra sucking power.

Fully Automatic Air Driven Heat Transfer Press

Fully automatic air-driven type The Horizontal pressure system gives uniform pressure, assuring no slippage of products. Pressure, pressing time, and temperature control can be made easily. The Teflon sheet is used on the aluminum upper press plate so that the plate does not soil and it can be cleaned easily. The silicon mat is used on the lower aluminum press plate An air compressor is required.

Air-driven Automatic Heat Transfer Press

Fully Automatic air-driven type. The horizontal pressurization prevents puckering. Pressure and temperature control can be made easily by digital. The upper press plate is processed with Teflon and aluminum, therefore the plate does not soil easily and can be cleaned easily. The auxiliary plate can be attached easily, depending on the products. (Dimentions: 350mm x 280mm) (※An air compressor is required) Compact and requires no other installation such as an air compressor, and can be installed very easily. A highly efficient and quiet compact heat transfer press with 1,000kg Max. pressure strength. Anti-static type Teflon sheet is used for the upper press plate, providing easy cleaning of the plate.

Automatic Heat Transfer Press

Heat transfer a label from pick up and pressing, by only pressing the button once. Fully Automatic Air Driven. Pressure and Temperature control can be made easily by digital. The upper press plate is processed with Teflon and aluminum, therefore the plate does not soil easily, and can be cleaned easily. The machine stand is standard equipment. Compact and requires no other installation such as an air compressor, and can be installed very easily. A highly efficient and quiet compact heat transfer press with 1,000kg Max. pressure strength. Anti-static type Teflon sheet is used for the upper press plate, providing easy cleaning of the plate.

Fully Automatic Heat Transfer Press

Compact and requires no other installation such as an air compressor, and can be installed very easily. A highly efficient and quiet compact heat transfer press with 1,000kg Max. pressure strength. Anti-static type Teflon sheet is used for the upper press plate, providing easy cleaning of the plate.

Drum Type Compact Sublimation Press

Since it is a Teflon belt, it has no heat shrinkage And that promises stable belt control. Low running cost compared to felt belt.

Continuous Type Sublimation Heat Transfer Drum Press

The drum type special heater assures uniform temperature balance. Non-contact temperature sensor and non-contact relay control the actual temperature. The temperature is controlled by a digital thermo which is very easy to read, so that the actual and established temperature can be recognized at a glance. The speed goes up instantly by a high-speed pedal, which is convenient to start winding. The reverse switch helps returning the material fed in by mistake. The feeding length of the cloth (material) can be shown on the measuring counter. * Require air compressor

Continous Heat Transfer Press

This machine is adopted upper position installation system. Installation of easy shrinking fabrics such as dual-layered fabrics to the machine is easy. Printed page comes to surface makes regulating pattern easy. Size of Heating Drum is φ405mm. And the temperature on the surface of the drum is uniformed. You can chose the size of table for material installation.（Option)

Flat Typ Sublimation

Maximum pressure is 300g/cm 2 and pressure controller shows current pressure so that it is easy to set required pressure. This heat transfer press machine is driven by motor , it does not require air system. Lower pressure plate is set on plinth with index planser. so that the plinth helps to change lower pressure plate The electronic thermostat and solid state relay control the temperature difference rang minimum Upper pressure plate adopt with unti-static electricity Tefion sheet , so that it can be cleaned easily.

Flat Type Sublimation

The Upper Plate is Coated with an Anti-Static Teflon Sheet for Soil-Free Operation. (In Case Adhesives and Other Impurities Stick To the Plate, They can be Moved Easily) The Special Heater Assures Excellent Thermal Efficiency and a Long Service Life. Aluminum is used for the Upper Plate, And The Electronic Thermostat and SSR control The Temperature Range.

Flat Type Sublimation

The temperature on the heating plate is uniform as the temperature is controlled by 3sections on the heating plate. The wide plate(2,200×1,000) allows pressing for a large size materials. The lower plate air pressing system with a special mat equipped assures uniform pressure. As the tray system which protrude the work table to the operater’s side, the working conditions has been improved.

Air Vaccum Type Sublimation

The Temperature On the Heating Plate is Uniform as the Temperature is controlled by 5 Sections. By Marking Vaccum Space at Pressing Point, Uniform and High Pressing is Assured. Full Auto Double Tray Sysytem Increase Your Productivity. It is useful to Transfer Pressing, Bonding, or Smoothing Out the Wrinkles for Sublimation Transfer. Compresser is required.

Sponging Machine

Bucket type auto releasing device is standard equipped. Device can be adjusted up and down.