Dürkopp Adler
513
CNC-controlled automatic lockstitch bartacker
Product features
Ideal solution for bartacking operations
The step motor-controlled clamp lift ensures shorter cycletimes and thus increased efficiency. Furthermore, the easy operation and the simple adaptation of the bartack patterns to individual requirements allow flexible and fast sewing in light to medium weight fabric.
Your benefits at a glance
Convenient for editing, saving and recalling bartack shapes
LCD Control panel
Symbols as well as the simple design make the control panel very user-friendly. The standard bartacks can be rapidly adapted to the different applications and stored, if required. Furthermore, modified standard bartack patterns and sequence programs can be assigned to the favourite buttons so that they are quickly retrievable.
Short thread trimmer with ≤ 3 mm
The short thread trimmer enables a remaining thread length of only ~ 3 mm. This ensures that no separate trimming operation is required.
Superior quality, excellent performance
Conversion kit "Heavy" (optional)
The optionally available conversion kit “Heavy” allows bartacking operations also in medium to heavy-weight materials.
Clean clothes and clean environment
No pollution
The fully sealed internal lubrication mechanism prevents pollution of the sewing material. This also reduces the noise level during operation. The targeted distribution of the lubricants extends the service life and helps to save resources.
Pattern Design Software (optional)
"Pattern Design Software" (optional)
The optional "Pattern Design Software" (parts-no. 0513 590024) enables easy and fast creation of individual tack patterns on the PC. The tack patterns can be easily transferred to the 513 control unit via an USB flash drive.
Optional contraction clamp for buttonhole bartacks (part no. 513 590014)
Contraction clamp (optional)
The automatic bartacker can optionally be equipped with a contraction clamp for bartacking buttonholes. When the clamp is lowered, the arms of clamp presses the buttonhole together. The buttonhole is thus perfectly closed after bartacking.
Versatile applications for bartacking oprations
The automatic bartacker 513 is equipped as standard with the clamping foot set no. 2, which is ideally suited for cross tacking in standard material. The clamping foot set no. 18 (part no. 0512 220184) for double D-tacking in piping pockets is optionally available
Stepper motor controlled clamp lifting
Short cycle time for higher efficiency due to stepper motor-controlled clamp release
Examples of use
Pocket openings
Pocket flaps
Belt loops
Buttonhole tack
Specifications
| Model | 513 |
|---|---|
| Clamp- or rail top feed | ● |
| Clearance when lifting [mm] max. | 17 |
| CNC contour control with program control | ● |
| Cylinder arm machine with clearance C [mm] D [mm] | C=180 / D=85 |
| Horizontal hook, small (S, Ø 22mm) | ● |
| Lockstitch (301) | ● |
| Memory capacity (stitches) [Stitches] max. | 16.000 |
| Needle size [Nm] max. | 80-110 |
| Needle system [Nm max.] * depending on the sewing equipment | 134 |
| Nominal voltage [V], [Hz] | 1x230V, 50 / 60 Hz |
| Number of sequences max. | 25 |
| Packaging size (Length, Width, Heigh) [mm] | 870 / 430 / 890 |
| Piece counter/ Bobbin capacity counter | ● |
| Rated power [W] max. | 500 |
| Seam patterns per sequence max. | 30 |
| Sewing field size X/Y [mm] max. * = On request also possible up to 800 x 550 mm ** = On request also possible up to 600 x 200 mm | 40x30 |
| Sewing Material SL = very light / L= light / LM = light to medium heavy / M= medium heavy / MS = medium heavy to heavy / S = heavy | LM or MS |
| Short thread trimmer [approx. length of remaining thread in mm] max | ● 3mm |
| Shuttle Hook | ● |
| Single needle | ● |
| Standard seam pattern max. | 100 |
| Stitch length [mm] max. | 0,1-10 |
| Stitches/min. max. *= depending on foot stroke **= depending on foot stroke and stitch length *** = in case of twin needle / three needle version less speed possible – dependent on needle distance ****= selectable per step *****= depending on the use of the stitch loosening device ******= max. 2,500 stitches in combination with conversion kit “Heavy” *******= The sewing speed depends on the type of cam used | 3.200* |
| Storage locations for modified seams max. | 100 |
| Synthetic [Tkt.] max. * = Max. thread size upper thread: Tkt. 10/3, max. thread size Unterfaden: Tkt. 20/3 ** = Max. thread size upper thread: Tkt. 15/3; max. thread size Unterfaden: Tkt. 40/3 | 50 / 3 - 150 / 3 |
| Thread wiper | ● |
| Weight, sewing head [kg] | 58 |
● Standard ○ Optional
Catalogue
The 513 documents Dürkopp Adler publishes, on their own site. They open in a new tab.
Open the catalogue (PDF)Open the instruction manual (PDF)Open the parts book (PDF)
And the catalogues Dürkopp Adler publishes for their whole range.
The file is published and updated by the manufacturer; it is not copied here, so nobody downloads an outdated version.
Data sheets, photos, videos and specifications: Dürkopp Adler.
Tell us the operation you need to solve and we will reply with the right configuration and the lead time.