175 / 176 / 179

Versatile single or double chainstitch machines

Class 175, a double chainstitch machine equipped with differential foot top feed and bottom feed, is particularly suitable for pre-assembly and assembly seams, e.g. seams inlining with / without piping, sleeve-, back-center seams as well as side and shoulder seams. Whether smooth seams or seams with partial fullness in the upper fabric layer, this machine has no limits.

The 176, a double chainstitch machine equipped with differential bottom feed, is particularly suitable for seams with partial fullness in the lower fabric layer, e.g. for taping operations and attaching waistbands in transport-critical materials.

The 179, a single thread chainstitch machine with differential foot-top feed can be used in jacket, blazer and coats productions, operations such as basting of collars, edges, hem, collar peak and collar break, pocket openings etc. simple andconvenient. If necessary, a partial fullness can be incorporated in the upper fabric layer.

Your benefits at a glance

175-141621

Class 175, a double chainstitch machine equipped with differential foot top feed and bottom feed, is particularly suitable for pre-assembly and assembly seams, e.g. seams in lining (with / without piping), sleeve-, back-center seams as well as side and shoulder seams. Whether smooth seams or seams with partial fullness in the upper fabric layer, this machine has no limits.

175-141621 - Conversion to two-needle machine

175 - Easy conversion to two-needle machine, needle distances up to 15mm

With the conversion set 175-590074, a simple conversion from single-needle to two-needle is possible. Needle distances up to 15mm can be converted.

Application example: Attaching endless zippers onto fly pieces – therefore the sewing head, which has been converted into a two-needle machine, is equipped with a needle distance of 5 mm.

176-141621

The 176, a double chainstitch machine equipped with differential bottom feed, is particularly suitable for seams with partial fullness in the lower fabric layer, e.g. for taping operations and attaching waistbands in transport-critical materials.

Constant or partial fullness in the upper / lower fabric layer

Depending on the machine class, fullness can be constantly or partially worked into the lower or upper material layer.

Class 175, a double chainstitch machine equipped with differential foot top feed and bottom feed, is particularly suitable for pre-assembly and assembly seams, e.g. seams in lining (with / without piping), sleeve-, back-center seams as well as side and shoulder seams. Whether smooth seams or seams with partial fullness in the upper fabric layer, this machine has no limits.

The 176, a double chainstitch machine equipped with differential bottom feed, is particularly suitable for seams with partial fullness in the lower fabric layer, e.g. for taping operations and attaching waistbands in transport-critical materials.

High-quality DÜRKOPP ADLER control technology

DÜRKOPP ADLER control technology

The machines are equipped with "DAC classic" control system.

„Plug and Play“ - all machine parameters can be stored in the machine ID and are retained when the control system is changed.

DAC classic control with control panel OP1000

• Electric strength (up to 400 V AC)

• Extended operating range (190 V AC to 250 V AC)

• Updatability via various storage media

• Special energy efficiency by optimum software parameters by means of machine ID technology

• Freely programmable functions and inputs

• Seam programming

Calling up a preset fullness via button

Easy recall of a preset fullness via button

The 4-button bar attached to the sewing head offers quick access to (from bottom to top):

• Fullness switching

• Second stitch length (depending on machine class)

• Needle up/down position

• Backtack suppression at the beginning / end of the seam

Pressing the quick access key for fullness, calls up the mechanically preset fullness. This makes it quick and easy to switch between two preset settings.

179-171629

The 179, a single thread chainstitch machine with differential foot-top feed can be used in jacket, blazer and coats productions, operations such as basting of collars, edges, hem, collar peak and collar break, pocket openings etc. simple and convenient. If necessary, a partial fullness can be incorporated in the upper fabric layer.

• Marking-free sewing with a patented lightweight lifting system (only 175 and 179)

• Smooth and elastic sewing results, even with transportcritical materials

• Always optimal stitch formation by the automatic adjustment of the lower thread quantity to the stitch length

• Electromagnetic functions such as thread trimmer and sewing foot lifting are standard in the machines

• Large, flexible application area

Examples of use

Close side and shoulder seams

Ruffling operations

Taping operations

Seams with fullness in the lower material ply

Basting operations

Lining seams

Attach endless zipper to fly piece

● Standard ○ Optional