Dürkopp Adler
610-10
Optimized work station for taping operations respective for pre-ruffeling of sleeves
Product features
Finest fullness nuances by means of differential top and bottom feed
Perfectly sized taped armholes and neck openings are guaranteed with this workstation. Due to the automatic tape unwinder, the the tape is fed free of tension. Furthermore, the tape feeder with the cutter allows automatic feeding of the tape within the seam and exact positioning and cutting. This method is cost-saving, as expensive tape is only used where it is desired and necessary.
Your benefits at a glance
Finest fullness nuances
Finest fullness nuances by means of differential top and bottom feed, stepper motor controlled
Finest fullness nuances by means of differential top and bottom feed, individually selectable, stepper motor controlled, exact repetition even in difficult fabrics
Ergonomically designed work station for fatigue-free working with integrated LED sewing light and optimal view to be processed
Simple programming
Easiest programming possible by teach-in procedure and automatic mirroring for the second sleeve
Constant fullness with exact repetition due to patented light stroke system
Operating panel OP7000
Modern, reliable and network-capable Dürkopp Adler control technology DAC comfort, with high-resolution touch panel OP7000
The touch screen with coloured graphic display of the seam course clearly shows the current program. All important parameters as e.g. fullness, thread tension, stitch length etc. are easily readable and programmable.
Tape unwinder and tape scissors
The 610 is equipped with a tape feeder with improved tape clamp for safe feeding of the tape. The tape feeder has been modified to allow a better view of the sewing area.The tape feed saves both time as well as material costs, subsequent cutting of the tape is not necessary.
Parameters like needle and bobbin thread tension, stitch length and speed can be programmed per step for a perfect stitch pattern
Short training times due to easiest operation
Service-friendly calibration instead of time-consuming mechanical adjustment
Quick and easy software update and sewing program saving by USB flash drive
Up to 80% faster seam programming compared to the classical method
Examples of use
Taping of front armholes
Taping of back armholes
Pre-ruffling with sleeve head roll of the sleeve crown
Pre-ruffling without sleeve head roll of the sleeve crown
Taping of jacket back parts (Special order)
Specifications
| Model | 610-10 |
|---|---|
| Air requirement per stroke / Air pressure [NL] [bar] | 0,1 / 6 |
| Automatic tape unwinder | ● |
| Differential bottom feed and variable top feed | ● |
| Dimensions (Length, Width, Height) [mm] | 1.350 / 900 / 1.250 |
| Double chainstitch (401) | ● |
| Feeding length Top feed; bottom feed | 8 / 6 |
| Flat bed machine with clearance C [mm] D [mm] | C=281 / D=144 |
| Fullness above, flat sewing, fullness below | ● |
| Integrated LED sewing light with dimmer | ● |
| Looper (crossline) | ● |
| Needle size [Nm] max. | 70-130 |
| Needle system [Nm max.] * depending on the sewing equipment | 934 RG |
| Nominal voltage [V], [Hz] | 1x230V, 50 / 60 Hz |
| Power consumption [kVA] max. | 0,5 |
| Program control, operating panel OP7000 with graphic display and touch screen | ● |
| Sewing Material SL = very light / L= light / LM = light to medium heavy / M= medium heavy / MS = medium heavy to heavy / S = heavy | L / M |
| Single needle | ● |
| Stitch condensinging and sewing foot lift, pedal controlled | ● |
| Stitch length [mm] max. | 1,0 - 4,0 |
| Stitches/min. max. *= depending on foot stroke **= depending on foot stroke and stitch length *** = in case of twin needle / three needle version less speed possible – dependent on needle distance ****= selectable per step *****= depending on the use of the stitch loosening device ******= max. 2,500 stitches in combination with conversion kit “Heavy” *******= The sewing speed depends on the type of cam used | 5.000 |
| Synthetic [Tkt.] max. * = Max. thread size upper thread: Tkt. 10/3, max. thread size Unterfaden: Tkt. 20/3 ** = Max. thread size upper thread: Tkt. 15/3; max. thread size Unterfaden: Tkt. 40/3 | 120 / 3 - 70 / 3 |
| Tape cutter in front of the needle, from top | ● |
| Thread trimmer | ● |
| Weight, complete [kg] | 114 |
| Weight, sewing head [kg] | 60 |
● Standard ○ Optional
Videos
Catalogue
The 610-10 documents Dürkopp Adler publishes, on their own site. They open in a new tab.
Open the catalogue (PDF)Open the instruction manual (PDF)Open the parts book (PDF)
And the catalogues Dürkopp Adler publishes for their whole range.
The file is published and updated by the manufacturer; it is not copied here, so nobody downloads an outdated version.
Data sheets, photos, videos and specifications: Dürkopp Adler.
Tell us the operation you need to solve and we will reply with the right configuration and the lead time.