Dürkopp Adler
1365
Two-head-overlock unit for serging the front and back trousers
Product features
The "Unbeatable" for highest productivity
Serging of trousers parts in practice is fraught with problems - far too often the cut edges are trimmed unintentionally. This results in unacceptable dimensional deviations for the garment. The ideal solution is provided by the two head serging unit class 1365. It is the best solution for achieving the highest quality standards and profitable productivity. The programmable fullness control for a uniform fullness distribution in the upper or lower fabric layer works constantly and reliably.
Your benefits at a glance
The 1365-7 is a twin-head overlock unit
Twin-head overlock unit for maximum efficiency
The trousers is completely serged in one operation, i.e. also the hem, seat curve and the vent curve can be integrated in the operation. Even trousers with knee lining can be processed without any problems: Both workpieces are fused by means of an adhesive tacker (optional) and serged without displacement with the desired fullness in the knee lining.
1365-7 Kneelining application
The twin-head overlock unit with optional adhesive tacker for efficient processing of front trousers with cut-to-size knee lining. The required fullness in the knee lining from below is distributed via the programmable differential bottom feed automatically.
The knee lining is fused with the upper fabric by means of the adhesive tacker. The trousers inseam is positioned at the 1st sewing head and the sewing operation starts automatically. The fabric is automatically guided and sewn and then transported to the 2nd sewing head. The side seam is automatically serged and the fabric is stacked automatically after the sewing process.
Differential top and bottom feed enables the processing of stretch material
The sewing unit 1365-7 with programmable differential top and bottom feed offers outstanding solutions for the rational serging of front and hind trousers components.It is excellently suited for different fullness amounts in knee lining processing and/or for processing stretch materials.
No material trimming
Dimensional accuracy
No material trimming – only protruding thread ends are cut – the dimensional accuracy of the parts is maintained.
Cross transport
Fully automatic serging of the second seam
Fully automatic stitching of the second seam by cross transport from head A to head B.
Three-Head overlock unit
The 1365-7 is a twin-head overlock unit and can additionally be equipped with a third sewing head allowing a further increase in efficiency when processing the trousers hem.
High-quality Dürkopp Adler control technology
High-quality control technology with “DAC classic” control system and machine-ID
The sewing units are equipped with the “DAC classic” control system. All machine parameters are stored in the machine ID and are retained when the control system is changed.
High productivity through overlapped working method
Up to 3 trouser parts can be processed simultaneously on the machine. While one trousers panel is being overlocked at each of sewing head 1 and 2, the next trousers panel can be prepared on the loading table with the knee lining bonding station. A 100% overlapped working method is thus possible and offers a fully utilized machine running time.
Examples of use
Hind trousers serging - Stretch material
Serging of trousers with kneelining
Performance
Casual applications for trousers and skirts
Fly / seat seams and hem
Specifications
| Model | 1365-7 |
|---|---|
| Adjustable table height | 850-1200 |
| Air requirement per stroke / Air pressure [NL] [bar] | 40 / 6 |
| Bulked thread [Tkt.] min. -max. | D-TEX 110-1 |
| Differential bottom feed and variable top feed | ● |
| Dimensions (Length, Width, Height) [mm] | 2.300 / 1.500 / 1.700 |
| Fullness above, flat sewing, fullness below | ● |
| Needle size [Nm] max. | 90-100 |
| Needle system [Nm max.] * depending on the sewing equipment | B 27 |
| Nominal voltage [V], [Hz] | 1x230V, 50 / 60 Hz |
| Power consumption [kVA] max. | 2 |
| Program control Operating panel with graphical display | ● |
| Serging width, selectable [mm] max. | 4,0 / 5,0 / 6,0 |
| Sewing Material SL = very light / L= light / LM = light to medium heavy / M= medium heavy / MS = medium heavy to heavy / S = heavy | LM |
| Single needle | ● |
| Stacker | ● |
| Stitch length Bottom feed; top feed [mm] max. | 1,0 - 4,5 / 1,0-5,0 |
| Stitches/min. max. *= depending on foot stroke **= depending on foot stroke and stitch length *** = in case of twin needle / three needle version less speed possible – dependent on needle distance ****= selectable per step *****= depending on the use of the stitch loosening device ******= max. 2,500 stitches in combination with conversion kit “Heavy” *******= The sewing speed depends on the type of cam used | 6.500 |
| Thread monitor *only on 2nd sewing head for needle and looper thread (1365-7) | 1* |
| Three-thread overlock (504) | ○ |
| Two-thread overlock (503) | ○ |
| Weight, complete [kg] | 380 |
● Standard ○ Optional
Videos
Catalogue
The 1365 documents Dürkopp Adler publishes, on their own site. They open in a new tab.
Open the catalogue · 1265-7 / 1365-7 (PDF)Open the catalogue · 1365-7 (PDF)Open the instruction manual (PDF)
And the catalogues Dürkopp Adler publishes for their whole range.
The file is published and updated by the manufacturer; it is not copied here, so nobody downloads an outdated version.
Data sheets, photos, videos and specifications: Dürkopp Adler.
Tell us the operation you need to solve and we will reply with the right configuration and the lead time.