Atlanta Attachment
1996
Automatic Collar and Waistband Workstation
Product features
Accepts 2 1/4″ to 8″ wide acrylic, woven or rib knit material Accepts 15″ to 50″ long (7 1/2″ to 25″ folded) bands Controls trim-off of 1/4″ to 1/8″ Stacker automatically indexes by number of pieces programmed The system automatically stops after a number of programmed bundles are completed or material supply is depleted Changeover time approx. 30 seconds, by the operator Will accommodate roll or festooned materials Only one operator is required for each 5 to 7 machines Cutting accuracy within 1/8″ of programmed length Cut length is programmable in 1/10″ increments Includes thread break detectors Electronic DC motor and controls Seam ply alignment within 1/8″ obtainable
Production
Approximately 487 pieces per hour. Estimate based on cycle time, material changeover, and machine program time. Depending on material and size of parts
Operation
The operator loads rolled or festooned rib knit, programs the desired length, and starts the machine. The material is metered, cut, sewn, and stacked automatically. Each band size can be individually programmed for the number of pieces in the stack, then automatically indexed.
Machine Model
Most industrial overlock machines.
Specifications
| Voltage (v/ph/hz) | 220v 1ph |
|---|---|
| Current (amps) | 5 |
| Air pressure (psi) | 90 |
| Air consumption (cfm) | 10 |
| Shipping weight (lbs) | 1100 |
| Shipping dimensions (w/l/h, inch) | 96 x 55 x 60 |
Catalogue
The 1996 documents Atlanta Attachment publishes, on their own site. They open in a new tab.
And the catalogues Atlanta Attachment publishes for their whole range.
The file is published and updated by the manufacturer; it is not copied here, so nobody downloads an outdated version.
Product information, photographs and specifications: Atlanta Attachment. No prices or stock here: ask us and we will get back to you.
Tell us the operation you need to solve and we will reply with the right configuration and the lead time.